logo

Archer Transfers
(on 11-03-2022 Out of Production)

P.O. Box 1277, Youngsville, NC 27596-1277, USA,
e-mail: info(at)archertransfers.com.


Download the Archer Catalogue:

logo
Archer Catalogue


previous back to index next

Click on the pictures


Product information and guarantee.

archer/productinformation.jpg
archer/productinformation-1.jpg

.


AR74003 - German national flag.

archer/74003-1.jpg
archer/74003.jpg
The set comes in a plastic bag with label.
The size of the transfer is (4 x 4.5)cm and contains four flags.
Instructionsheet is included.
Read instructionsheet careful.
.


AR72059R - German WWII turret characters.

archer/instructionsheet.jpg
archer/72059R.jpg
The set comes in a plastic bag with label.
The size of the transfer is (5 x 7.5)cm and contains 10 rows of turret-characters in two different sizes.
Instructionsheet is included.
Read instructionsheet careful.
.


AR72043 - German WWII Balken Kreuz #1

archer/instructionsheet.jpg
archer/72043.jpg
The set comes in a plastic bag with label.
The size of the transfer is (7 x 7)cm and contains 5 rows of Balkencruz in black or white and different variants.
Instruction is included.
Read instructionsheet careful.
.


AR72048W - US stars in circles

archer/instructionsheet.jpg
archer/72048W.jpg
archer/72048W-2.jpg
The set comes in a plastic bag with label.
The size of the transfer is (7.5 x 9.5)cm and contains different sizes US stars in circles.
Instructionsheet is included.
Read instructionsheet careful.
.


Surface details - rivets/screws - armor casting symbols and markings

Many plastic and resin models in "Braille Scale" lack details such as rivets/screws, armor casting symbols and an upgrade is needed. Creating correct rivets etc. is a nightmare for many modellers most of the time. There are tools available such as punch and die sets and other instruments. There are also many techniques using glue, hot needle, very thin sprue etc. It appears that Archer Transfers has devised a very simple way to create nice rivets etc. They have developed a way to cast tiny resin details onto clear decal film that can be applied as simply as a water slide decal.

For more information see below:

AR88001 - Surface details #1 - rivets/screws sheet of .008, .011, .014 inch diameter fastener heads. There is a total of almost 100 linear inches of rivets on this sheet. This is a good choice if you're not looking for any specific scale and just need a selection of various size rivets.

archer/88001/01.jpg
archer/88001/01.gif
archer/88001/02.jpg
archer/88001/03.jpg
archer/88001/04.jpg
The set comes in a plastic bag with label.
The size of the transfer is (7.5 x 11)cm and contains rivets/screws in different sizes.
The transfer is usable for various scales (braille Scale).
Instructionsheet is included.
Read instructionsheet careful.

An entirely new technology molds three dimensional details onto clear decal film that is applied UNDER the paint to add missing details or to replace details lost by sanding. Apply like water slide decals.
.

archer/surf/03.jpg
archer/surf/01.jpg
archer/surf/04.jpg

.

archer/surf/06.jpg
archer/surf/05.jpg
archer/surf/07.jpg

.


AR88014 - a full sheet of the smallest (.008 inch diameter) rivets on this sheet: 108" (274 cm) of .028" (.71 mm) spacing, 44" (112 cm) of .068" (1.73 mm) spacing and 36" (92 cm) of .095" (2.41 mm) spacing.

archer/88014/01.gif

.


AR88015 - a full sheet of the middle-size (.011 inch diameter) rivets on this sheet: 108" (274 cm) of .043" (1.09 mm) spacing, 44" (112 cm) of .068" (1.73 mm) spacing and 36" (92 cm) of .098" (2.49 mm) spacing.

archer/88015/01.gif

.

For Al Magnus' review of Archer surface details set AR88015, visit:

logo "On the Way" Website


AR88016 - a full sheet of the largest (.014 inch diameter) rivets on this sheet: 108" (274 cm) of .057" (1.44 mm) spacing, 32" (81 cm) of .083" (2.11 mm) spacing and 32" (81 cm) of .124" (3.15 mm) spacing.

archer/88016/01.gif

.


Other decals.

AR88007 - Surface details #7 - armor casting symbols and markings.

archer/88007-2.jpg
archer/88007.jpg
archer/88007-1.jpg
The set comes in a plastic bag with label.
The size of the transfer is (7.5 x 11)cm and contains armor casting symbols and markings.
The transfer is usable for various scales (braille Scale).
Instructionsheet is included.
Read instructionsheet careful.

An entirely new technology molds three dimensional details onto clear decal film that is applied UNDER the paint to add missing details or to replace details lost by sanding. Apply like water slide decals.
.

archer/88007-0.jpg
archer/surf/1.jpg
archer/surf/2.jpg
archer/surf/3.jpg

.

archer/surf/4.jpg
archer/surf/5.jpg
archer/surf/6.jpg

.

For Rob Haelterman's review of Archer surface details, visit:

logo "On the Way" Website


For more information and ordering:

logoWebsite Archer-Transfers

logoE-mail to ArcherTransfers, U.S.A.

Download the Archer Catalogue:

logoArcher Catalogue


Email to HenkofHolland:

Note:

This website is an extension of my modeling hobby and serves to inform only. It is NOT possible to order merchandise directly from me.
I do not own a (web-)shop. You will find some reliable vendors in the "links" page.

logoE-mail to HenkofHolland

Note: To become a valid e-mail address, replace in email address (at) with @


Valid HTML 4.0 TransitionalValid HTML 4.0 Transitional


previous back to index next