|
Built diorama and model by Ivan Visek
For "On The Way" preview about kit 72002 - Würzburg-Riese RADAR Station visit:
For "On The Way" preview about kit 72003 - BA-64 visit:
Built model by Tomas Hrdlicka
For "On The Way" preview about kit 72006 - Dorchester AEC 4x4 visit:
For "Doug Chaltry's / OTW" review about kit 72006 - Dorchester AEC 4x4 visit:
For "On The Way" preview about kit 72010 - Tetrarch visit:
Built model by Jaroslav Kotlaba
Model built by Petr Hlavacek
For "On The Way" preview about kit 72014 - Panhard 178 visit:
Built model by Didier Badaracchi
Built model by Tomas Hrdlicka
For "On The Way" preview about kit 72018 - Morris MK-II Light Reconnaissance Car visit:
Model built by Paco Motos Orellana
Built model by Christian Weber - (M8 greyhound converted with Schatton 2cm Drillings-MG)
For "On The Way" preview about kit 72020 - M8 Greyhound visit:
For "On The Way" preview about kit 72021 - M20 visit:
For an "On The Way" preview about kit 72022 - Skoda RSO visit:
For an "Stephen Brezinski's / OTW" preview about kit 72022 - Skoda RSO visit:
For "On The Way" preview about kit 72023 - Fries 16 tons German WWII Field Crane visit:
Built model by Tomas Hrdlicka
For "On The Way" preview about kit 72025 - Lanz-Bulldog Tractor 30HP visit:
For "Stephen Brezinski's / OTW" preview about kit 72025 - Lanz-Bulldog Tractor 30HP visit:
Comments NKRmodels - Skoda RSO
A really nice little kit! There are 26 injected resin
parts (with excellent detail), a photo etched fret (44 parts), a small
decal sheet and a piece of clear
acetate (for the windscreen and windows). The chassis is a one piece
moulding with separate axles/differentials and drive shafts. The Cab is
also a one piece
moulding with a fairly well detailed interior. There is no engine, but
the rear tray has optional frame work for a canvas awning (not supplied
but which could be made
from 'doped' tissue paper). The four large wheels have good tread
detail
Comments NKRmodels - Fries 16t. Field Crane
Definately for experienced modellers only! If you like working with photo etched brass this is for you...if you don't...forget it! There are three large photo etched frets along with a small bag of 17 resin parts. The etched parts are used to make all the 'frame' work (the over head 'beam' and the two supports), while the resin is for the two support bases (the wheels are moulded onto the 'legs' and so do not turn), the crane's hook and 'dolly'. The chain for the 'hook' is photo etched...which
means it will hang rather 'stiffly'! An interesting but complicated model.
Comments NKRModels - "Freya LZ" FuMG 410A Radar
12 resin parts and three photo etched frets...if you are looking for value for money, this is definately not the kit for you! However, if you want to add a German WW2 ground based radar station (used by both the air force and navy) to your collection........ The resin parts build up into the support tower while the etched parts provide the complex radar array and the three 'frame work' base support arms. Definately for the dedicated 'all things German' modellers, only!
Built model by Tomas Hrdlicka
Model built by Joe Turchick
For "On The Way" preview about kit 72027 - AEC MK-II / III visit:
For "T-izumi's " review about kit 72028 and diorama - Achilles IIC visit:
For "Doug Chaltry's / OTW" preview about kit 72028 - Achilles IIC visit:
M10 - Wolverine
Like Extratech's first injection moulded release, the Achilles, the M.10 is made by Eduard...so you know the quality is first class! There are 231 crisp, clean injection
moulded parts (some extremely small)...including 'link and length' tracks. Also in the kit is a small photo etched fret of details ... a decal sheet with markings for six
M.10s ... and a 16 page instruction booklet, which has four view drawings of each tank depicted on the decal sheet. All the running gear is moulded separately and
you get optional style upper hulls (although only one type is used). There are optional position hatches and interior detail in the driver's compartment and turret. The
gun and turret are moveable...as is the turret mounted machine gun. Upper hull accessories include an axe, shovel, mallet, hand rails etc.
For "Doug Chaltry's / OTW" preview about kit 72029 - M10 GMC Wolverine visit:
Built model by Vojislav Jereb
M36 GMC Jackson
Yet another Eduard produced, injection moulded kit from Extratech...this one being a re-working of the 76.2mm GMC M-10, released earlier this year. The M-36
has a new sprue of turret and gun parts, a small sprue of seven resin parts, a larger photo etched fret with engine grills and a new set of decals with markings for two
tanks...U.S. 703rd tank destroyer batallion Germany 1944 and U.S. 2nd cavalry third army Germany 1945. As with the M-10, there are well over 100 crisp, clean
injection moulded parts...including link and length tracks, separate road wheels and suspension. There's also interior detail (driver's compartment and turret), optional
position hatches and separate upper hull accessories (axe, shovel, crow bar, mallet etc.).
Built model by Tomas Hrdlicka - (with Somua S35 tractor - rebuilt Heller)
For "On The Way" preview about kit 72031 - Schwere Feldhaubitze sFH.18 visit:
For "Doug Chaltry's / OTW" preview about kit 72033 - Achilles (Extra Pack) visit:
For "Doug Chaltry's / OTW" preview about kit 72035 - Sherman M4 75mm Early visit:
For "Volker Helms "First Look" about kit 72037 - V100 "Commando" - Post War visit:
For an "Will Alcott's / OTW" preview about kit 72039 - V100 U.S.A. Force visit:
Built model by Pat Dauga
For "Doug Chaltry's / OTW" preview about kit 72040 - M36 GMC Extra Pack visit:
For "Doug Chaltry's / OTW" preview about kit 72041 - Firefly 1C visit:
For "Carli Danilo's / OTW " review about kit 72041 - Firefly 1C visit:
For "Volker Helms "First Look" about kit 72042 - Challenger A30 visit:
Note: To become a working e-mail address, replace in email address (at) with @
|
|
"On the Way" Website
"T-izumi" Website - (5 pages)
Website IPMS Deutschland
Extratech Website
PMilona Website
E-mail to HenkofHolland